로딩 중...
산업용 측정 장비 · 제어 부품 · 글로벌 브랜드 통합 쇼핑몰

프로그래머블 질량 유량계 및 합산기
필터 또는 검색 기능을 사용하여 원하시는 모델을 찾으십시오.
총 36개의 상품 · 1 - 20 표시
| 제품 번호 / 가격 | Brand | Accuracy | Accuracy Detail | Altitude Sensitivity | Calibration | Compliance | Data Interface | Display Type | Electrical Output | Enclosure Ratings | Humidity Range | Leak Rate Under Vacuum | Materials, Wetted | Media Compatibility | Operating Pressure, Max | Operating Pressure, Min | Operating Temperature, Max | Operating Temperature, Min | Output Detail | Output Signal | Power Consumption | Pressure Coefficient | Pressure Drop, Max | Process Connection Size | Process Connection Type | Repeatability | Response Time | Response Time Note | Supply Power Note | Supply Voltage | Switch Rating | Switch Type | Temperature Coefficient | Turndown Ratio | Volumetric Flow Rate, Max | Volumetric Flow Rate, Min | 수량 / 장바구니 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
FMA-43192,756,780 원2 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 3/8 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 100 SLM | 0.1 SCCM, 2 SLM | |
FMA-43182,821,310 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 3/8 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 80 SLM | 0.1 SCCM, 1.6 SLM | |
FMA-43172,821,310 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 3/8 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 60 SLM | 0.1 SCCM, 1.2 SLM | |
FMA-43162,379,820 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 50 SLM | 0.1 SCCM, 1 SLM | |
FMA-43152,410,800 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 40 SLM | 0.1 SCCM, 0.8 SLM | |
FMA-43142,379,820 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 30 SLM | 0.1 SCCM, 0.6 SLM | |
FMA-43121,974,740 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 10 SLM | 0.1 SCCM, 0.2 SLM | |
FMA-43132,409,510 원2 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 20 SLM | 0.1 SCCM, 0.4 SLM | |
FMA-43112,026,050 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 5 SLM | 0.1 SCCM, 0.1 SLM | |
FMA-43102,026,050 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 2 SLM | 0.1 SCCM, 0.04 SLM | |
FMA-43092,026,050 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 1 SLM | 0.1 SCCM, 0.02 SLM | |
FMA-43072,018,970 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 200 SCCM | 4 SCCM | |
FMA-43082,026,050 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 500 SCCM | 10 SCCM | |
FMA-43061,974,740 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 100 SCCM | 2 SCCM | |
FMA-43051,964,470 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 50 SCCM | 1 SCCM | |
FMA-43042,018,970 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 20 SCCM | 0.4 SCCM | |
FMA-43032,000,790 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 10 SCCM | 0.2 SCCM | |
FMA-43022,273,060 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | LCD | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 0.18 psi | 1/4 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 5 SCCM | 0.1 SCCM | |
FMA-41192,787,880 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | None | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 3/8 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 100 SLM | 0.1 SCCM, 2 SLM | |
FMA-41182,717,200 원9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | ± 1 % | ± 1% of FS at calibration temperature and pressure | Deviation of up to 1% from stated accuracy, after re-zeroing | NIST 10-Point Certificate | CE | RS232 | None | 4 to 20 mA, 0 to 5 Vdc | Inst. Level II/Poll. Degree II (IEC 60664) | Up to 70% | less than 10^⁻9 cc He/s | 316 Stainless Steel, Aluminum, Brass, FKM | Air, Gases, Nitrogen, Oxygen | 500 psi | 0 psi | 50 °C | 5 °C | Linear 0 to 5 Vdc (3000 Ω min load impedance); Linear 4 to 20 mA (500 Ω max loop resistance). Max noise 20 mV peak to peak (for 0 to 5 Vdc output) | Current, Voltage | 2.4 W | 0.01% FS/psi | 4 psi | 3/8 in | Compression Fitting | ± 0.15% | 2 sec | 600 ms time constant; approximately 2 seconds to within ± 2% of set flow rate for 25 to 100% of full scale flow | Transducer Input Power: 11 to 26 Vdc, 100 mV max peak to peak output noise | 11 to 26 Vdc | 30 Vdc, 1A | SPDT NO/NC, Selectable | 0.15% FS/°C | 50:1 | 80 SLM | 0.1 SCCM, 1.6 SLM |
스페이스를 누른 채 마우스 휠을 움직이면 표를 좌우로 스크롤할 수 있습니다.