MX1101-TH-Logger | Britestone

모델 보기

필터 또는 검색 기능을 사용하여 원하시는 모델을 찾으십시오.

총 1개의 상품

제품 번호 / 가격	Brand	Accuracy Detail	Approvals	Battery Size and Type	Battery life	Configuration	Data Interface	Data Interface Note	Display Note	Display Type	Enclosure Ratings	Form Factor Note	Form factor	Height	Input Type	Length	Logging Modes	Measurement Type	Memory Note	Number of Measurements	Operating Temperature, Max	Operating Temperature, Min	RH Resolution	RH Sensor Drift	Radio Power	Relative Humidity	Relative Humidity Accuracy	Response Time	Response Time Note	Restart Mode	Samples,Max	Start Modes	Stop Modes	Supply Power Type	Temperature Accuracy	Temperature Measurement, Max	Temperature Measurement, Min	Temperature Resolution	Temperature Sensor Drift	Time Accuracy	Transmission Range	Weight	Width	수량 / 장바구니
MX1101가격 문의9 weeks리드타임은 상황에 따라 달라질 수 있습니다.	OMEGA Engineering	Temperature Sensor Accuracy: ± 0.21°C from 0° to 50°C, Relative Humidity Accuracy: ± 2% from 20% to 80% at 25°C	CE	Alkaline AAA	1 yr, typical with reading interval of 1 min	HOBOmobile® app Android, iOS	Bluetooth	Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, or Android 4.4, 5.0, 5.1 and Bluetooth 4.0 or later Bluetooth Compatibility : Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)	LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range	LCD	IP50	"Use the four magnets on the back of the logger case to mount it to a magnetic surface. • Attach Command strips to the back of the logger to mount it a wall or other flat surface. Double up the two Command strips so that they protrude past the magnets. • Use the double-sided tape to affix the logger to a surface. • Insert the hook-and-loop strap through the mounting loops on both sides of the logger to mount it to a curved surface, such as a pipe or tubing."	Magnetic Surface or Insert the tie wraps	0.9 in	Internal	3.34 in	burst, Fixed interval	Relative Humidity, Temperature	Approximately 60 seconds; may take longer the further the device is from the logger	2	70 °C	-20 °C	0.0001	<1% Per Year	1 mW	1% to 95%	± 2% RH	Temperature: 7 hrs 30 Min, RH: 20 sec	Temperature: 7:30 Minutes in air moving 1 m/s, RH: 20 seconds to 90% in airflow of 1 m/s	Push button	85k Samples, Interval Selectable 1 sec to 18hrs	At set date and time, Button Push, Immediate Start, Next Interval	Button Push, When Memory is Full, At set date and time, At set Duration	Battery	± 0.21°C	70 °C	-20 °C	0.024 °C	< 0.1°C Per Year	± 1 minute/month at 25°C	30.5 m	1.98 oz	1.44 in

스페이스를 누른 채 마우스 휠을 움직이면 표를 좌우로 스크롤할 수 있습니다.

제품 번호 / 가격

Brand

Accuracy Detail

Approvals

Battery Size and Type

Battery life

Configuration

Data Interface

Data Interface Note

Display Note

Display Type

Enclosure Ratings

Form Factor Note

Form factor

Height

Input Type

Length

Logging Modes

Measurement Type

Memory Note

Number of Measurements

Operating Temperature, Max

Operating Temperature, Min

RH Resolution

RH Sensor Drift

Radio Power

Relative Humidity

Relative Humidity Accuracy

Response Time

Response Time Note

Restart Mode

Samples,Max

Start Modes

Stop Modes

Supply Power Type

Temperature Accuracy

Temperature Measurement, Max

Temperature Measurement, Min

Temperature Resolution

Temperature Sensor Drift

Time Accuracy

Transmission Range

Weight

Width

수량 / 장바구니

MX1101가격 문의9 weeks리드타임은 상황에 따라 달라질 수 있습니다.

OMEGA Engineering

Temperature Sensor Accuracy: ± 0.21°C from 0° to 50°C, Relative Humidity Accuracy: ± 2% from 20% to 80% at 25°C

Alkaline AAA

1 yr, typical with reading interval of 1 min

HOBOmobile® app Android, iOS

Bluetooth

Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, or Android 4.4, 5.0, 5.1 and Bluetooth 4.0 or later Bluetooth Compatibility : Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart)

LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range

LCD

IP50

"Use the four magnets on the back of the logger case to mount it to a magnetic surface. • Attach Command strips to the back of the logger to mount it a wall or other flat surface. Double up the two Command strips so that they protrude past the magnets. • Use the double-sided tape to affix the logger to a surface. • Insert the hook-and-loop strap through the mounting loops on both sides of the logger to mount it to a curved surface, such as a pipe or tubing."

Magnetic Surface or Insert the tie wraps

0.9 in

Internal

3.34 in

burst, Fixed interval

Relative Humidity, Temperature

Approximately 60 seconds; may take longer the further the device is from the logger

70 °C

-20 °C

0.0001

<1% Per Year

1 mW

1% to 95%

± 2% RH

Temperature: 7 hrs 30 Min, RH: 20 sec

Temperature: 7:30 Minutes in air moving 1 m/s, RH: 20 seconds to 90% in airflow of 1 m/s

Push button

85k Samples, Interval Selectable 1 sec to 18hrs

At set date and time, Button Push, Immediate Start, Next Interval

Button Push, When Memory is Full, At set date and time, At set Duration

Battery

± 0.21°C

70 °C

-20 °C

0.024 °C

< 0.1°C Per Year

± 1 minute/month at 25°C

30.5 m

1.98 oz

1.44 in