
DwyerOmegaCNITH-Series
CNITH-I3233-2-C24-DC
iSeries Humidity and Temperature Controller
- 판매 가격
- 가격 문의
수량
재고: 0개국내 재고가 없어도 주문 가능합니다. 주문 시 해외 재고를 확인합니다.
무료 배송 10만원 이상
납기: 60 weeks리드타임은 상황에 따라 달라질 수 있습니다.
연구비카드 사용가능
실시간 문의하기제품 사양
Brand:OMEGA Engineering
A/D Conversion:A/D Conversion: 12-bit RH and 14-bit temp Reading,Rate: 2 samples per sec max,Digital Filter: Programmable Decimal Selection: None, 0.1 for temperature and humidity
Additional Features 1:2 inch Probe
Control Action:Action: Reverse (heat) or direct (cool)
Control Output:2 SPDT Relay
Data Interface:RS232, RS485
Data Interface Note:RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status RS485: Addressable from 0 to 199
Display Size:10.2 mm (0.40 in)
Display Type:Dual 4 Digit LED
Display Type Note:Display: 4-digit, 9-segment LED i32, i16D, i8DV: 10.2 mm (0.40") i8: 21 mm (0.83") i8DH: 10.2 mm (0.40") and 21 mm (0.83") RED, GREEN and AMBER programmable colors for process variable, setpoint and temp units
Enclosure Ratings:IP65, NEMA Type 4X
Form factor:1/32 DIN
Input Note:Input Accuracy/Range @ 25C - Non-condensing: ±3% for 10 to 90%; ±3.5% for 5 to 10% and 90 to 95% ±4% for 0 to 5% and 95 to 100% Hysteresis: ±1% RH Non-linearity: ±3% Temperature Accuracy/Range* ±0.5°C for 5° to 45°C (±1°F for 41 to 113°F); up to ±1.5°C for -40° to 5°C and 45° to 124°C (up to ±2.7°F for -40° to 41°F and 113° to 255°F) Resolution: 0.1%, 12bit for RH; 0.1°C, 14 bit for temperature Response Time: 8 seconds, tau 63% for RH; 5 to 30 seconds, tau 63% for temperature *Note: Extended temperature range is for industrial probe only, the controller’s operating temperature is 0 to 50°C.
Input Type:Digital
Measurement Type:Temperature, Humidity
Number of Inputs:2
Number of Outputs:2
Operating Temperature, Max:50 °C
Operating Temperature, Min:0 °C
Output Detail:2 solid state relays (SSR’s): 0.5 A @ 120/240 Vac continuous
Probe Dimensions Note:51 mm (2") probe for iTH with 1 m (3') cable
Probe Length:51 mm
Ramp and Soak:Single Ramp & Soak
Relative Humidity:90% RH non-condensing
Samples,Max:2/sec
Supply Power Note:Low voltage power option: 20 to 36 Vdc, 24 Vac ±10%; 12 to 36 Vdc, 24 Vac ±10% for iTH-32
Supply Power Type:DC
Supply Voltage:20 to 36 Vdc
