DwyerOmegaCNI-Series
CNIS1633-C24-DC
i-Series Temperature, Process and Strain Controllers
- 판매 가격
- 가격 문의
수량
재고: 0개국내 재고가 없어도 주문 가능합니다. 주문 시 해외 재고를 확인합니다.
무료 배송 10만원 이상
납기: 60 weeks리드타임은 상황에 따라 달라질 수 있습니다.
연구비카드 사용가능
실시간 문의하기제품 사양
Brand:OMEGA Engineering
A/D Conversion:Dual Slope
Accuracy:± 0.03 %
Accuracy Detail:0.03% reading
Additional Features 1:Programmable 3 Color Display
Analog Current:0 to 20 mA (500 Ω maximum)
Approvals:UL, C-UL, UKCA, CE per EN61010- 1:2001, F
CMRR:120 dB
Cold Junction Compensation:50 ppm/°C
Control Characteristics:Control Action: Reverse (heat) or direct (cool) Rate: 0 to 399.9 s Reset: 0 to 3999 s Cycle Time: 1 to 199 s; set to 0 for on/off Gain: 0.5 to 100% of span; setpoints 1 or 2 Damping: 0000 to 0008 Soak: 00.00 to 99.59 (HH:MM), or OFF
Control Mode:PID Control, On-off control
Control Output:SPDT Relay
Current, Max:0 to 20 mA (5 Ω load)
Cutout Dimensions:45 x 45 mm
Data Interface:RS485, RS422, RS232
Data Interface Note:RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability: program to transmit current display, alarm status, min/max, actual measured input value and status. RS485: Addressable from 0 to 199
Decimal Selection:0,001, 0,01, 0,1, None
Digital Filter:Programmable
Display Size:46 mm (1.8 in)
Display Type:4 Digit LED
Display Type Note:4-digit 9-segment LED 10.2 mm (0.40"); i32, i16, i16D, i8DV 21 mm (0.83"); i8 10.2 mm (0.40") and 21 mm (0.83"); i8DH RED, GREEN, and AMBER programmable colors for process variable, setpoint and temperature units
Electrical Connection:Screw Terminal
Enclosure Ratings:None
Form factor:1/16 DIN
Height:48 mm
Impedance Input:10 MΩ for 100 mV; 1 MΩ for 1V or 10 Vdc
Input Configuration:Single-ended
Input Type:mA, Voltage, Strain
Input Voltage:0 to 100 mVdc, -100 mVdc to 1 Vdc, 0 to 10 Vdc
Isolated Analog Voltage:0 to 10 Vdc (max 20 mA)
Isolation:Isolation Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test
Length:127 mm
Linearization Points:Up to 10
Measurement Type:Current, Strain, Voltage
NMRR:60 dB
Number of Control Outputs:2
Number of Inputs:1
Offset Adjustment:-1999 to 9999
Output Detail:Solid State Relay/0.5 A at 120/240 Volts continuous, Pulsed Driver 10 Volts at 20 mA /for use with external SSR;Control Output 1 and 2 Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID and ramp and soak Output 1: SPDT, can be configured as alarm 1 output Output 2: SPDT, can be configured as alarm 2 output SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous DC Pulse: Non-isolated; 10 Vdc @ 20 mA Analog Output (Output 1 Only): Non-isolated, proportional 0 to 10 Vdc or 0 to 20 mA; 500 52 max Output 3 Retransmission Isolated Analog Voltage and Current Current: 10 V max @ 20 mA output Voltage: 20 mA max for 0 to 10 V output
Output Signal:None
Polarity:Unipolar
Ramp Setpoint:Ramp to Setpoint: 00.00 to 99.59 (HH:MM), or OFF
Ramp and Soak:Single Ramp & Soak
Remote Setpoint:None
Resolution:10/1µV
Sampling Rate:3 Hz (3 updates/second)
Set Point Adjustment:Menu Configurable
Span Adjustment:0.001 to 9999 counts
Step Response:0.7 sec for 99.9%
Supply Power Note:12 to 36 Vdc, 24 Vac; 20 to 36 Vdc for dual display, ethernet, or isolated analog output option; Excitation Voltage Note-24 Vdc @ 25 mA (not available for low-power option)
Supply Power Type:DC
Supply Voltage:12 to 36 Vdc
Temperature Stability:Temperature Stability: RTD: 0.04°C/°C; TC @ 25°C (77°F): 0.05°C/°C ; Cold Junction Compensation Process: 50 ppm/°C
Thermocouple Lead Resistance, Max:100 Ω
Thermocouple Type:None
Tuning:Autotune
Weight:159 g
Width:48 mm