로딩 중...
산업용 측정 장비 · 제어 부품 · 글로벌 브랜드 통합 쇼핑몰
산업용 측정 장비 · 제어 부품 · 글로벌 브랜드 통합 쇼핑몰
고정밀 직결 센서 USB 데이터 수집 시스템
필터 또는 검색 기능을 사용하여 원하시는 모델을 찾으십시오.
총 2개의 상품
| 제품 번호 / 가격 | Brand | Analog I/O Note | CMRR | Common Mode Voltage | Current Measurement Range | Data Interface Note | Digital Filter Type | Digital I/O Note | Digital Input | Digital Output | Height | Impedance Input | Input Type | Length | Materials | Mounting | Number of Channels, Input | Number of Channels, Output | Operating Temperature, Max | Operating Temperature, Min | Output Signal | Protection | Pull-down Resistor | Relative Humidity | Resistance Measurement Range | Sensor Type | Storage Temperature, Max | Storage Temperature, Min | Supply Power Note | Supply Power Type | Supply Voltage | Temperature Measurement Range | Voltage Measurement Range | Width | Isolation | 수량 / 장바구니 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
INET-600가격 문의9 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | Analog: Number of Channels: 16 single-ended (SE)/8 differential (DI), A/D Converter: 24-bit when averaging each point for ≥1m sec; and 16 bits when not averaging, Voltage: See voltage accuracy/range charts, , Protected Voltage: ±30 Vdc with power on or off, RFI Filter: 13 KHz RFI filter on ≤ ±150 mV range Digital: Number of Channels: 4 digital I/O (4 mA sink/source, 0 to 3.3V): “0” Input Voltage: 0 to 0.8 Vdc, “1” Input Voltage: 2 to 5.5 Vdc, “1” Input Current: Amps = Vin / 50 kΩ (“1” must drive internal 50 kΩ pull down resistor), Pull-Down Resistor: 50 kΩ ±1% | ≥110dB (0 to 60 Hz) | ±10 Vdc | ±80 uA, ±120 uA, ±500 uA, ±600 uA, ±800 uA, ±1.2 mA, ±2.5 mA, ±12 mA, ±24 mA, 0 to 24 mA | InstruNet Software | Elliptic, Chebyshev B, Chebyshev S, or Butterworth | Number of Channels: 4 digital I/O (4 mA sink/source, 0 to 3.3V) “0” Input Voltage: 0 to 0.8 Vdc “1” Input Voltage: 2 to 5.5 Vdc “1” Input Current: Amps = Vin / 50 kΩ (“1” must drive internal 50 kΩ pull down resistor) “0” Output Voltage: <0.7 Vdc @ <2 mA; < 0.9 Vdc @ 4 mA “1” Output Voltage: 2.2 to 3.3 Vdc @ 4 mA Pull-Down Resistor: 50 kΩ ±1% Sink Current: 4 mA | Digital: Low = 0 to 0.8 Vdc | “0” Output Voltage: <0.7 Vdc @ <2 mA; < 0.9 Vdc @ 4 mA, “1” Output Voltage: 2.2 to 3.3 Vdc @ 4 mA | 58 mm | 100 MΩ | Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain, Potentiometer, Current, Resistance, Flow, Pressure, Digital | 24 mm | Plastic | Place on Desktop, Attach to Wall, or place inside another Enclosure (OEM) | Analog: 8 DIFF/16 SE, Digital: 4 | Digital: 4 | 70 °C | 1 °C | Digital | Protected Voltage: ±30 Vdc with power on or off | 50 kΩ ±1% | <90% RH, no condensation | 1 to 50 kΩ Pot, 0 to 33 Ω, 0 to 100 Ω, 0 to 330 Ω, 0 to 1 kΩ, 0 to 3300 Ω, 0 to 10 kΩ | Thermocouple Type J, K, T, E, R, S, B, N, C, G, D, 100 Ω RTD, 500 Ω RTD, 1 kΩ RTD, 2252 Ω Thermistor | 70 °C | -20 °C | Voltage Reference At Hd44 Connector: 3.30 Vdc (80 mA) | DC | ± 5 Vdc | TEMP LABEL 1 To be Updated | ±20 mV, ±40 mV, ±80 mV, ±150 mV, ±300 mV, ±600 mV, ±1.2V, ±2.5V, ±5V, ±10V | 96 mm | - | |
INET-601가격 문의10 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | Analog: Number of Channels: 16 single-ended (SE)/8 differential (DI), A/D Converter: 24-bit when averaging each point for ≥1m sec; and 16 bits when not averaging, Voltage: See voltage accuracy/range charts, , Protected Voltage: ±30 Vdc with power on or off, RFI Filter: 13 KHz RFI filter on ≤ ±150 mV range Digital: Number of Channels: 4 digital I/O (4 mA sink/source, 0 to 3.3V): “0” Input Voltage: 0 to 0.8 Vdc, “1” Input Voltage: 2 to 5.5 Vdc, “1” Input Current: Amps = Vin / 50 kΩ (“1” must drive internal 50 kΩ pull down resistor), Pull-Down Resistor: 50 kΩ ±1% | ≥110dB (0 to 60 Hz) | ±10 Vdc | ±80 uA, ±120 uA, ±500 uA, ±600 uA, ±800 uA, ±1.2 mA, ±2.5 mA, ±12 mA, ±24 mA, 0 to 24 mA | InstruNet Software | Elliptic, Chebyshev B, Chebyshev S, or Butterworth | Number of Channels: 4 digital I/O (4 mA sink/source, 0 to 3.3V) “0” Input Voltage: 0 to 0.8 Vdc “1” Input Voltage: 2 to 5.5 Vdc “1” Input Current: Amps = Vin / 50 kΩ (“1” must drive internal 50 kΩ pull down resistor) “0” Output Voltage: <0.7 Vdc @ <2 mA; < 0.9 Vdc @ 4 mA “1” Output Voltage: 2.2 to 3.3 Vdc @ 4 mA Pull-Down Resistor: 50 kΩ ±1% Sink Current: 4 mA | Digital: Low = 0 to 0.8 Vdc | “0” Output Voltage: <0.7 Vdc @ <2 mA; < 0.9 Vdc @ 4 mA, “1” Output Voltage: 2.2 to 3.3 Vdc @ 4 mA | 58 mm | 100 MΩ | Voltage, Thermocouple, Thermistor, RTD, Load Cell, Strain, Potentiometer, Current, Resistance, Flow, Pressure, Digital | 24 mm | Plastic | Place on Desktop, Attach to Wall, or place inside another Enclosure (OEM) | Analog: 8 DIFF/16 SE, Digital: 4 with electrical isolation | Digital: 4 | 70 °C | 1 °C | Digital | Protected Voltage: ±30 Vdc with power on or off | 50 kΩ ±1% | <90% RH, no condensation | 1 to 50 kΩ Pot, 0 to 33 Ω, 0 to 100 Ω, 0 to 330 Ω, 0 to 1 kΩ, 0 to 3300 Ω, 0 to 10 kΩ | Thermocouple Type J, K, T, E, R, S, B, N, C, G, D, 100 Ω RTD, 500 Ω RTD, 1 kΩ RTD, 2252 Ω Thermistor | 70 °C | -20 °C | Voltage Reference At Hd44 Connector: 3.30 Vdc (80 mA) | DC | ± 5 Vdc | TEMP LABEL 1 To be Updated | ±20 mV, ±40 mV, ±80 mV, ±150 mV, ±300 mV, ±600 mV, ±1.2V, ±2.5V, ±5V, ±10V | 96 mm | ±36 Vdc bank electrical isolation |
스페이스를 누른 채 마우스 휠을 움직이면 표를 좌우로 스크롤할 수 있습니다.