로딩 중...
산업용 측정 장비 · 제어 부품 · 글로벌 브랜드 통합 쇼핑몰
산업용 측정 장비 · 제어 부품 · 글로벌 브랜드 통합 쇼핑몰
HOBO MX 블루투스 저에너지 수위 데이터 로거
필터 또는 검색 기능을 사용하여 원하시는 모델을 찾으십시오.
총 5개의 상품
| 제품 번호 / 가격 | Brand | Accuracy Detail | Additional Features 1 | Approvals | Battery Size and Type | Battery life | Configuration | Data Interface | Data Interface Note | Diameter | Enclosure Ratings | Form Factor Note | Input Type | Length | Logging Modes | Materials | Measurement Pressure, Max | Measurement Pressure, Min | Measurement Type | Memory Modes | Memory Note | Number of Measurements | Operating Temperature, Max | Operating Temperature, Min | Pressure Accuracy | Radio Power | Samples,Max | Start Modes | Stop Modes | Supply Power Type | Temperature Accuracy | Temperature Measurement, Max | Temperature Measurement, Min | Temperature Resolution | Time Accuracy | Transmission Range | Water Level Accuracy | Water Level Resolution | Weight | 수량 / 장바구니 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MX2001-04-Ti가격 문의13 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | Temperature Sensor Accuracy: ± 0.44°C from 0° to 50°C, Water Level Accuracy: ± 0.05% FS, 0.5 cm, Pressure Accuracy: ± 0.075% FS, 0.3 cm (0.01 ft) water | Submersible, Titanium, 4m (13') Range | CE, FCC | Alkaline AAA | 1 yr, typical with reading interval of 1 min | HOBOmobile® app Android, iOS | Bluetooth | Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart) | 1 in | IP67, NEMA Type 6 | "Make sure the top end is connected to the sensor end with the water level logger cable as described in Getting Started with the Logger. 2. Attach any small parts, such as bolts with nuts, before you go into the field so you don’t risk losing them in the field. 3. Lower the logger into the well or stilling well. 4. Use the Onset well cap if it is a 5 cm (2 inch) well. Otherwise, use a 1/4-inch bolt of sufficient length to span the well top or washer" | Internal | 3.9 in | burst, Fixed interval, multiple intervals | Titanium | 145 kPa | 69 kPa | Pressure, Temperature, Water Level | stop when full, Wrap when full | Approximately 2 minutes; may take longer the further the device is from the top end of the logger | 2 | 50 °C | -20 °C | ± 0.075 % | 1 mW | ~33k Samples, Interval Selectable 1 sec to 18hrs | At set date and time, Button Push, Immediate Start, Next Interval | Button Push, When Memory is Full, Manual via remote software connection, At set date and time, At set Duration | Battery | ± 0.44 °C | 50 °C | -20 °C | 0.1 °C | ± 1 minute/month 0° to 50°C | 30.5 m | ± 0.075% | <0.014 kPa | 1.3 oz | |
MX2001-04가격 문의13 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | Temperature Sensor Accuracy: ± 0.44°C from 0° to 50°C, Water Level Accuracy: ± 0.05% FS, 0.5 cm, Pressure Accuracy: ± 0.075% FS, 0.3 cm (0.01 ft) water | Submersible, Stainless Steel, 4m (13') Range | CE, FCC | Alkaline AAA | 1 yr, typical with reading interval of 1 min | HOBOmobile® app Android, iOS | Bluetooth | Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart) | 1 in | IP67, NEMA Type 6 | "Make sure the top end is connected to the sensor end with the water level logger cable as described in Getting Started with the Logger. 2. Attach any small parts, such as bolts with nuts, before you go into the field so you don’t risk losing them in the field. 3. Lower the logger into the well or stilling well. 4. Use the Onset well cap if it is a 5 cm (2 inch) well. Otherwise, use a 1/4-inch bolt of sufficient length to span the well top or washer" | Internal | 3.9 in | burst, Fixed interval, multiple intervals | Stainless Steel | 145 kPa | 69 kPa | Pressure, Temperature, Water Level | stop when full, Wrap when full | Approximately 2 minutes; may take longer the further the device is from the top end of the logger | 2 | 50 °C | -20 °C | ± 0.075 % | 1 mW | ~33k Samples, Interval Selectable 1 sec to 18hrs | At set date and time, Button Push, Immediate Start, Next Interval | Button Push, When Memory is Full, Manual via remote software connection, At set date and time, At set Duration | Battery | ± 0.44 °C | 50 °C | -20 °C | 0.1 °C | ± 1 minute/month 0° to 50°C | 30.5 m | ± 0.075% | <0.014 kPa | 1.9 oz | |
MX2001-01-Ti가격 문의4 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | Temperature Sensor Accuracy: ± 0.44°C from 0° to 50°C, Water Level Accuracy: ± 0.05% FS, 0.5 cm, Pressure Accuracy: ± 0.075% FS, 0.3 cm (0.01 ft) water | Submersible, Titanium, 9m (30') Range | CE, FCC | Alkaline AAA | 1 yr, typical with reading interval of 1 min | HOBOmobile® app Android, iOS | Bluetooth | Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart) | 1 in | IP67, NEMA Type 6 | "Make sure the top end is connected to the sensor end with the water level logger cable as described in Getting Started with the Logger. 2. Attach any small parts, such as bolts with nuts, before you go into the field so you don’t risk losing them in the field. 3. Lower the logger into the well or stilling well. 4. Use the Onset well cap if it is a 5 cm (2 inch) well. Otherwise, use a 1/4-inch bolt of sufficient length to span the well top or washer" | Internal | 3.9 in | burst, Fixed interval, multiple intervals | Titanium | 207 kPa | 69 kPa | Pressure, Temperature, Water Level | stop when full, Wrap when full | Approximately 2 minutes; may take longer the further the device is from the top end of the logger | 2 | 50 °C | -20 °C | ± 0.075 % | 1 mW | ~33k Samples, Interval Selectable 1 sec to 18hrs | At set date and time, Button Push, Immediate Start, Next Interval | Button Push, When Memory is Full, Manual via remote software connection, At set date and time, At set Duration | Battery | ± 0.44 °C | 50 °C | -20 °C | 0.1 °C | ± 1 minute/month 0° to 50°C | 30.5 m | ± 0.05% | 0.02 kPa | 1.3 oz | |
MX2001-03가격 문의13 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | Temperature Sensor Accuracy: ± 0.44°C from 0° to 50°C, Water Level Accuracy: ± 0.05% FS, 0.5 cm, Pressure Accuracy: ± 0.075% FS, 0.3 cm (0.01 ft) water | Submersible, Stainless Steel, 76m (250') Range | CE, FCC | Alkaline AAA | 1 yr, typical with reading interval of 1 min | HOBOmobile® app Android, iOS | Bluetooth | Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart) | 1 in | IP67, NEMA Type 6 | "Make sure the top end is connected to the sensor end with the water level logger cable as described in Getting Started with the Logger. 2. Attach any small parts, such as bolts with nuts, before you go into the field so you don’t risk losing them in the field. 3. Lower the logger into the well or stilling well. 4. Use the Onset well cap if it is a 5 cm (2 inch) well. Otherwise, use a 1/4-inch bolt of sufficient length to span the well top or washer" | Internal | 3.9 in | burst, Fixed interval, multiple intervals | Stainless Steel | 850 kPa | 69 kPa | Pressure, Temperature, Water Level | stop when full, Wrap when full | Approximately 2 minutes; may take longer the further the device is from the top end of the logger | 2 | 50 °C | -20 °C | ± 0.075 % | 1 mW | ~33k Samples, Interval Selectable 1 sec to 18hrs | At set date and time, Button Push, Immediate Start, Next Interval | Button Push, When Memory is Full, Manual via remote software connection, At set date and time, At set Duration | Battery | ± 0.44 °C | 50 °C | -20 °C | 0.1 °C | ± 1 minute/month 0° to 50°C | 30.5 m | ± 0.05% | <0.085 kPa | 1.9 oz | |
MX2001-02가격 문의13 weeks리드타임은 상황에 따라 달라질 수 있습니다. | OMEGA Engineering | Temperature Sensor Accuracy: ± 0.44°C from 0° to 50°C, Water Level Accuracy: ± 0.05% FS, 0.5 cm, Pressure Accuracy: ± 0.075% FS, 0.3 cm (0.01 ft) water | Submersible, Stainless Steel, 30m (100') Range | CE, FCC | Alkaline AAA | 1 yr, typical with reading interval of 1 min | HOBOmobile® app Android, iOS | Bluetooth | Mobile Device Compatibility: iOS 8.3, 8.4 & 9.0, and Bluetooth 4.0 or later Bluetooth Compatibility :Bluetooth 4.0 or later (Bluetooth Low Energy, Bluetooth Smart) | 1 in | IP67, NEMA Type 6 | "Make sure the top end is connected to the sensor end with the water level logger cable as described in Getting Started with the Logger. 2. Attach any small parts, such as bolts with nuts, before you go into the field so you don’t risk losing them in the field. 3. Lower the logger into the well or stilling well. 4. Use the Onset well cap if it is a 5 cm (2 inch) well. Otherwise, use a 1/4-inch bolt of sufficient length to span the well top or washer" | Internal | 3.9 in | burst, Fixed interval, multiple intervals | Stainless Steel | 400 kPa | 69 kPa | Pressure, Temperature, Water Level | stop when full, Wrap when full | Approximately 2 minutes; may take longer the further the device is from the top end of the logger | 2 | 50 °C | -20 °C | ± 0.075 % | 1 mW | ~33k Samples, Interval Selectable 1 sec to 18hrs | At set date and time, Button Push, Immediate Start, Next Interval | Button Push, When Memory is Full, Manual via remote software connection, At set date and time, At set Duration | Battery | ± 0.44 °C | 50 °C | -20 °C | 0.1 °C | ± 1 minute/month 0° to 50°C | 30.5 m | ± 0.05% | <0.04 kPa | 1.9 oz |
스페이스를 누른 채 마우스 휠을 움직이면 표를 좌우로 스크롤할 수 있습니다.