DwyerOmegaiLD-Series
ILD44-UTP-C24
Large Display Meters & PID Controllers
- 판매 가격
- 가격 문의
수량
재고: 0개국내 재고가 없어도 주문 가능합니다. 주문 시 해외 재고를 확인합니다.
무료 배송 10만원 이상
납기: 60 weeks리드타임은 상황에 따라 달라질 수 있습니다.
연구비카드 사용가능
실시간 문의하기제품 사양
Brand:OMEGA Engineering
A/D Conversion:Dual slope
Accuracy:± 0.5 °C
Accuracy Detail:±0.5°C temperature; 0.03% rdg
Alarm modes:Band, High/Low, Latch/Unlatch, Normally Open/Closed, Process/Deviation
Common Mode Rejection:120 dB
Control Mode:Reverse (heat) or direct (cool)
Current Measurement Range:0 to 20 mA
Data Interface:RS232, RS485, RS422
Data Interface Note:Ethernet : Standards compliance IEEE 802.3 10Base-T Supported Protocols : TCP/IP, ARP, HTTPGET RS232/RS422/RS485/MODBUS : Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status. RS485 : Screw terminals
Decimal Selection:0, 0,001, 0,01, 0,1
Digital Filter:Programmable
Display Color:Red, Green, Amber
Display Size:57.2 mm (2.25 in)
Display Type:4 Digit, 7 Segment LED
Display Type Note:4-digit or 6-digit, 7-segment LED 57.2 mm (2.25") or 101.6 mm (4.00") red, green and amber programmable colors for process variable, set point and temperature units
Electrical Connection:Screw Terminal
Enclosure Ratings:IP65, NEMA Type 4
Excitation Voltage Note:Optional in Place of Communication
Impedance Input:10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc
Input Configuration:Single-ended
Input Type:Themocouple, RTD, Current, Voltage
Isolation:Power to Input/Output: 2300 Vac per 1 min test (RS232/485, input or output) Between Inputs: 500 Vac per 1 min test
Normal Mode Rejection:60 dB
Offset Adjustment:-1999 to +9999
Operating Temperature, Max:40 °C
Operating Temperature, Min:0 °C
Polarity:Unipolar
Power Consumption:22.5 W
RTD Type:100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; α= 0.00385 or 0.00392
Reading Rate:3 samples/sec
Relative Humidity:90% RH non-condensing
Resolution:1°/0.1°; 10 µV process
Sensor/Transmitter Power:24 Vdc @ 25 mA
Set Point Adjustment:-1999 to 9999 counts
Span Adjustment:0.001 to 9999 counts, programmable
Step Response:0.7 sec for 99.9%
Supply Power Note:100 to 240 Vac ±10%, 50/60 Hz
Supply Voltage:100 to 240 Vac
Temperature Stability:RTD: 0.04°C/°C;Thermcouple @ 25°C (77°F): 0.05°C/°C—cold junction
Thermocouple Lead Resistance, Max:100 Ω
Thermocouple Type:J, K, T, E, R, S, B, C, N, L
Voltage Measurement Range:0 to 100 mV, 0 to 1 V, 0 to 10 Vdc
Warm-Up to Rated Accuracy:60 min