DwyerOmegai-Series-Strain
CNIS3224-C24-DC
1/32 DIN Models iS32 Strain and Process Meters and Controllers
- 판매 가격
- 가격 문의
수량
재고: 0개국내 재고가 없어도 주문 가능합니다. 주문 시 해외 재고를 확인합니다.
무료 배송 10만원 이상
납기: 60 weeks리드타임은 상황에 따라 달라질 수 있습니다.
연구비카드 사용가능
실시간 문의하기제품 사양
Brand:OMEGA Engineering
Accuracy:± 0.03 %
Analog-to-Digital Technique:Dual slope
Approvals:UL, C-UL, UKCA, CE per EN61010- 1:2001, F
CMRR:120 dB
Control Action:Action: Reverse (heat) or direct (cool)
Control Output:SSR Relay
Cutout Dimensions:0.886 x 1.772 in
Data Interface:RS232, RS485, RS422
Data Interface Note:Isolated RS232 and RS485/422, 300 to 19.2 Kb
Decimal Selection:0,001, 0,01, 0,1, None
Digital Filter:Programmable
Display Note:4-digit 9-segment LED 10.2 mm (0.40"); i32, i16, i16D, i8DV 21 mm (0.83"); i8 10.2 mm (0.40") and 21 mm (0.83"); i8DH RED, GREEN, and AMBER programmable colors for process variable, setpoint and temperature units
Display Type:LED
Electrical Connection:Screw Terminal
Enclosure Ratings:IP65, NEMA Type 4, NEMA Type 4X
Form factor:1/32 DIN
Height:1 in
Impedance Input:10 MΩ for 100 mV;1 MΩ for 1V or 10 Vdc
Input Range Note:0 to 100 mVdc,-100 mVdc to 1 Vdc, 0 to 10 Vdc, 0 to 20 mA
Input Type:Single Ended, Voltage, Current, Strain, Temperature
Isolation:Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test
Length:5 in
Linearization Points:Up to 10
Measurement Type:Current, Strain, Temperature, Voltage
Mounting:Panel
NMRR:60 dB
Number of Digits:4
Number of Inputs:5
Number of Relays:1
Offset Adjustment:-1999 to 9999
Operating Temperature, Max:55 °C
Operating Temperature, Min:0 °C
Output Detail:SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous, DC Pulse: Non-isolated; 10 Vdc @ 20 mA
Output Signal:DC Pulse
Polarity:Unipolar
RTD Type:100/500/1000 Ω Pt
Reading Rate:3/sec
Relative Humidity:90% RH non-condensing
Resolution:10/1µV
Retransmission/Analog Output:Solid State Relay/0.5 A at 120/240 Vac continuous Pulsed Driver 10 Vdc at 20 mA /for use with external SSR
Sampling Rate:3 Hz (3 updates/second)
Sensor Excitation:24 Vdc @ 25 mA (not available for low-power option)
Set Point Adjustment:Menu Configurable
Step Response:0.7 s for 99.9%
Supply Power Note:Low Voltage Power Option: 24 Vac**, 12 to 36 Vdc for DPi/CNi/DPiS/CNiS; 20 to 36 Vdc for dual display, ethernet and isolated analog output from qualified safety approved source
Supply Power Type:DC
Supply Voltage:12 to 36 Vdc, 24 Vac
Temperature Stability:50 ppm/°C
Thermocouple Type:J, K, T, E, R, S, B, C, N, L
Weight:127 g
Width:1.89 in